10Pcs Mini 1A Lithium Battery Charging Module Board With USB Interface
97
Direct purchase from the factory 
Tabbacin Biyan Kuɗi lafiya
Kyauta Kyauta
Manufar Jigilar Kaya
Manufar KomawaKyauta Kyauta
Barka da zuwa Roymall, shafinku na siyan kyaututtuka masu inganci. Muna girmama goyon bayanku, kuma muna ba da kyauta kyauta tare da kowane siyayya. Shirya don bincika tarinmu kuma ku sami kyaututtukanku masu dacewa.Manufar Jigilar Kaya
Za mu aika kayanku cikin kwanaki 2 bayan siyayya.Lokacin jigilar kaya yawanci kwanaki 5-7 ne.Saboda jigilar mu ta duniya ne, lokacin jigilar zai dogara da wurin ku.1. Manufar Komawa
Muna karɓar abubuwan da aka saya daga roymall.com kawai. Ba za a iya mayar da kyauta kyauta ba. Dole ne abu ya kasance ba a yi amfani da shi ba kuma a cikin yanayin da kuka karɓa.Za mu sarrafa komawar ku cikin kwanaki 3-5 bayan karɓa.Ba za a iya mayar da abubuwan da aka keɓance ba.Tuntuɓi mu. service@roymall.com ko Whatsapp: +86193598494712.Manufar Maida Kuɗi
Za ku sami cikakken maida kuɗi bayan mu karɓi abubuwan da aka dawo. Kuɗin jigilar kaya ba za a iya mayar da su ba.Tuntuɓi mu. service@roymall.com ko Whatsapp: +8619359849471
nt10Pcs Mini 1A Lithium Battery Charging Module Board With USB Interface
nt
ntDescription:
nt
ntCharging method: linear charge 1%
ntCharging current: 1A adjustable
ntCharge accuracy: 1.5%
ntInput voltage: 4.5V-5.5V
ntFull charge voltage: 4.2V
ntCharging indicator: Red charging green full charge
ntCharging input interface: Mini USB
ntWorking temperature: -10°C to +85°C
ntReverse: NO
ntSize: 25 x 19 x 10mm
nt
ntNote:
nt
ntAmpere meter can only be connected to 5V input end of the module.
ntIt is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
ntThe connection wire should not be too long.
ntMake sure the connect point is good.
ntIf the input voltage is too high, like 5.2V, the current will be less than 1000mA, it is normal. It is protection function, Auto-substract the charging current to avoid burn damage to chip.
ntInput reverse has no effect on the chip, but the output (battery terminals) reverse will burn chips.
nt
ntApplications:
nt
ntThis module is used for single-or multi-section parallel lithium lithium rechargeable battery, charging from the USB port to take power.
nt
ntPackage included:
nt
nt10 x 1A lithium battery charging modulen
nt
ntDescription:
nt
ntCharging method: linear charge 1%
ntCharging current: 1A adjustable
ntCharge accuracy: 1.5%
ntInput voltage: 4.5V-5.5V
ntFull charge voltage: 4.2V
ntCharging indicator: Red charging green full charge
ntCharging input interface: Mini USB
ntWorking temperature: -10°C to +85°C
ntReverse: NO
ntSize: 25 x 19 x 10mm
nt
ntNote:
nt
ntAmpere meter can only be connected to 5V input end of the module.
ntIt is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
ntThe connection wire should not be too long.
ntMake sure the connect point is good.
ntIf the input voltage is too high, like 5.2V, the current will be less than 1000mA, it is normal. It is protection function, Auto-substract the charging current to avoid burn damage to chip.
ntInput reverse has no effect on the chip, but the output (battery terminals) reverse will burn chips.
nt
ntApplications:
nt
ntThis module is used for single-or multi-section parallel lithium lithium rechargeable battery, charging from the USB port to take power.
nt
ntPackage included:
nt
nt10 x 1A lithium battery charging modulen
nt
nt
Electronics Ranking
nt
nt
