MKronRC MK610 2.4G 6CH Receiver For Spektrum JR DSM2 DX6 DX6I DX7 DSX7 Transmitter
85
Direct purchase from the factory 
Tabbacin Biyan Kuɗi lafiya
Kyauta Kyauta
Manufar Jigilar Kaya
Manufar KomawaKyauta Kyauta
Barka da zuwa Roymall, shafinku na siyan kyaututtuka masu inganci. Muna girmama goyon bayanku, kuma muna ba da kyauta kyauta tare da kowane siyayya. Shirya don bincika tarinmu kuma ku sami kyaututtukanku masu dacewa.Manufar Jigilar Kaya
Za mu aika kayanku cikin kwanaki 2 bayan siyayya.Lokacin jigilar kaya yawanci kwanaki 5-7 ne.Saboda jigilar mu ta duniya ne, lokacin jigilar zai dogara da wurin ku.1. Manufar Komawa
Muna karɓar abubuwan da aka saya daga roymall.com kawai. Ba za a iya mayar da kyauta kyauta ba. Dole ne abu ya kasance ba a yi amfani da shi ba kuma a cikin yanayin da kuka karɓa.Za mu sarrafa komawar ku cikin kwanaki 3-5 bayan karɓa.Ba za a iya mayar da abubuwan da aka keɓance ba.Tuntuɓi mu. service@roymall.com ko Whatsapp: +86193598494712.Manufar Maida Kuɗi
Za ku sami cikakken maida kuɗi bayan mu karɓi abubuwan da aka dawo. Kuɗin jigilar kaya ba za a iya mayar da su ba.Tuntuɓi mu. service@roymall.com ko Whatsapp: +8619359849471
MKronRC MK610 2.4G 6CH Receiver For Spektrum JR DSM2 DX6 DX6I DX7 DSX7 Transmitter
Description:
Brand Name: MKronRC
Item Name: MK610
Version: For RC Airplane version
Band: 2.4GHz
Channel: 6
Modulation: DSM2
Description:
Brand Name: MKronRC
Item Name: MK610
Version: For RC Airplane version
Band: 2.4GHz
Channel: 6
Modulation: DSM2
Operating Voltage: 3.5V - 9.6V
Antenna Length: 2 x 30mm
Dimension: 32x21x13mm
Weight: 6.2g
Application: Compatible with Spektrum,JR,DSM2 transmitter, such as DX6,DX6I,DX7,DSX7 Transmitter.
Note: Only suitable for RC Airplanes
How to Bind:
a. Insert the bind plug in the BATT/BIND port on the receiver.
b. Supply power to the receive,the receiver LED light is off.
c. Set the transmitter to Non-failsafe protection status (put the throttle control rod to the lowest position).
d. Press and hold the light on the transmitter TX module and turn on the transmitter,note that the LED on the TX module should be flashing,then in few seconds the receiver LED should be flashing,the LED stays on.
e. Remove the bind plug .Transmitter and receiver are bound to each other .
Application: Compatible with Spektrum,JR,DSM2 transmitter, such as DX6,DX6I,DX7,DSX7 Transmitter.
Note: Only suitable for RC Airplanes
How to Bind:
a. Insert the bind plug in the BATT/BIND port on the receiver.
b. Supply power to the receive,the receiver LED light is off.
c. Set the transmitter to Non-failsafe protection status (put the throttle control rod to the lowest position).
d. Press and hold the light on the transmitter TX module and turn on the transmitter,note that the LED on the TX module should be flashing,then in few seconds the receiver LED should be flashing,the LED stays on.
e. Remove the bind plug .Transmitter and receiver are bound to each other .
General Notes:
1) This is not a Spektrum DSM2/X product, nor is it a copy of a Spektrum DSM2/X product. The Spektrum and DSM2/X brand is a trademark of Horizons Hobbies USA.
2) This is not an underground black market fakes Spektrum product.
3) Only one bind procedure is required on a new receiver. Repetitive binding provides no extra security. Always remember to remove the binding harness after successful bind is completed.
Package Included:
1x MK610 Receiver
1x Bind Plug
Package Included:
1x MK610 Receiver
1x Bind Plug
