HGLRC C1 2.4GHz 8CH Built-in ELRS Entry-Level Remote Control for FPV DCL Liftoff DRL RC Racer Drone
Tabbacin Biyan Kuɗi lafiya

Kyauta Kyauta
Barka da zuwa Roymall, shafinku na siyan kyaututtuka masu inganci. Muna girmama goyon bayanku, kuma muna ba da kyauta kyauta tare da kowane siyayya. Shirya don bincika tarinmu kuma ku sami kyaututtukanku masu dacewa.Manufar Jigilar Kaya
Za mu aika kayanku cikin kwanaki 2 bayan siyayya.Lokacin jigilar kaya yawanci kwanaki 5-7 ne.Saboda jigilar mu ta duniya ne, lokacin jigilar zai dogara da wurin ku.1. Manufar Komawa
Muna karɓar abubuwan da aka saya daga roymall.com kawai. Ba za a iya mayar da kyauta kyauta ba. Dole ne abu ya kasance ba a yi amfani da shi ba kuma a cikin yanayin da kuka karɓa.Za mu sarrafa komawar ku cikin kwanaki 3-5 bayan karɓa.Ba za a iya mayar da abubuwan da aka keɓance ba.Tuntuɓi mu. service@roymall.com ko Whatsapp: +86193598494712.Manufar Maida Kuɗi
Za ku sami cikakken maida kuɗi bayan mu karɓi abubuwan da aka dawo. Kuɗin jigilar kaya ba za a iya mayar da su ba.Tuntuɓi mu. service@roymall.com ko Whatsapp: +8619359849471Description:
HGLRC C1 Remote Control
Built-in ELRS: ELRS 2.4GHZ
Built-in ELRS refresh rate: 250Hz
Remote control sensor type: potentiometer sensor
Antenna: built-in ipex1 generation copper tube antenna
Working voltage: 6-8.4v DC
Remote control distance: greater than 500m
Output interface:
TX module NANO bin (crsf protocol)
TYPE-C(only charging and firmware flashing)
3.5MM analog trainer port
Battery: 18650 flat head battery u00d72 (need to be installed by yourself) Charging:
TYPE-C charging current 1.2A
The charging time is about 3-4 hours
Remote control channel: 8 channels
Bluetooth: Bluetooth 4.2
ELRS firmware upgrade method: WIFl or TYPE-C cable brush
ELRS firmware version: ELRS 3.0
ELRS firmware name: DIY devices 2.4 GHz DIY ESP32 + E28 2.4GHz TX Weight: 195g (excluding battery)
Size: 160mmx130mmx50mm (excluding remote rod)
Wireless Dongle
Built-in ELRS Maximum supported frequency: 250hz
Receiving distance: more than 200m
Binding method: Quickly power on and off three times to enter binding mode
Interface: USB TYPE-C+USB TYPE-A double plug
Working voltage: 5v
ELRS firmware upgrade method: WIFI or USB plug
ELRS firmware version: ELRS 3.0
ELRS Firmware Name: HGLRC 2.4 GHz HGLRC Herme 2.4GHz RX External receiver support protocol: only supports CRSF protocol Weight:9.5g
Size: 74mmx21mmu00d712.5mm
Features:
1. Built-in 500mw radio frequency module, which can realize stable signal transmission and remote control distance;
2. The operation procedures are extremely simplified, and common operations such as frequency pairing, power adjustment, and joystick calibration can be realized without a screen, and you can get started quickly;
3. Mix and match design of three-stage switch and two-stage switch;
4. It can be equipped with a wireless dongle, no need to connect a USB data cable when practicing the simulator, and the dongle also has USB-A and USB-C dual interfaces;
5. Support the installation of third-party receivers and tuners;
Package Included:
1x HGLRC C1 Remote Control
1x Remote Control Hanging Strap
1x (Optional) Wireless Dongle
1x USB-C Data Cable